#6 | Low height protections

Low removable protections without work I Boat entrance – Building entrance – Basement staircase – Lift access – Ventilation grids

MegaSecur.Europe has developed a range of equipment to deal with low-level flooding, for water depths up to 35cm.

Water-Gate flexible dams © | WL-14 Series

Delivered in a duffel bag, the barrier is rolled up on itself, the leading edge is already weighted. It is sufficient to unroll the barrier in front of the entrance to be protected, even if the flooding has already started.

To prevent water from running backwards, place a sandbag on each side under the backdrop, on the hinge side, making sure it rests against the facade.

Adapts to all surfaces without work: paving stones, tarmac, concrete, grass, gravel … even in the presence of obstacles (curbs, angles, door stops …).

Please note that flexible dams are not 100% waterproof. Leak water must be collected by pumping.

WL-1417 (35 cm x 5.2 m):

  • Maximum water retention height: 35 cm
  • Protective length: 5.2 m
  • Width (depth of ground surface): 140 cm
  • Packaging: l 45cm x L 75cm x H38cm
  • Weight: 14.0 kg

WL-1430 (35 cm x 9.1 m):

  • Maximum water retention height: 35 cm
  • Protective length: 9.1 m
  • Width (depth of ground surface): 140 cm
  • Packaging: l 44cm x L 75cm x H38cm
  • Weight: 24 kg

WL-1450 (35 cm x 15.2 m):

  • Maximum water retention height: 35 cm
  • Protective length: 15.2 m
  • Width (depth of ground surface): 140 cm
  • Packaging: l 58cm x L 76cm x H 39cm
  • Weight: 39.7 kg

Sticky polyurethane blanking plates

Allows complete sealing of the bottom of the doors | For clean and smooth surfaces.
Washable and reusable polyurethane protection.
The adhesive side of the polyurethane is protected by a siliconed canvas.
Standard reference | PU 300R: 10mm x 300cm x 35cm | 11.6 kg

See other sticky polyurethane containment products: Polyurethane Bar BP70

Flexible flood cover | Custom made

PVC canvas with integrated peripheral ballast or polyurethane coating.
It suffices to correctly position the canvas on the ground.
The ballast keeps the canvas in place even with a strong flow.
The water pressure on the periphery ensures a correct seal.